| |
Precision Spinal Fusion Allografts
SteriGraft™
Cervical Cortical Ring
Depth A-P:
11 mm± 1 mm
Width M-L: 13 mm± 1 mm
Height S-I: 5,6,7,8,9,10, or 11 mm
Description: Solid Cortical Ring sourced from Human Fibula,
Radius or ulna with a minimum sidewall of 1.5 mm. Medulary
canal natural. Allograft is offered parallel or lordosed 5º
(2.5º on both superior and inferior end), Textured or
non-textured on graft/host interface.
|
|
SteriGraft™
Cortical Cancellous Ring
Diameter: 12 mm
Height S-I: 5,6,7,8, or 9 mm
Description: Solid Cortical Ring 12 mm diameter with 7 mm
center hole. A 7.1 mm cancellous dowel is pre-inserted into
center hole and is 1 mm longer than height of graft (.5 mm
each end) This allograft is sourced from side wall of human
Femur and Tibia with a minimum allograft wall thickness of
2.5 mm. Graft design is offered parallel or lordosed 5º
(2.5º on both superior and inferior end).
|
|
SteriGraft™
ALIF Spinal Fusion Graft
Small Profile A:
Length: A-P: 26 mm ± 2 mm
Width: M-L: 26 mm ± 2 mm
Height S-I: 12, 14, 16, 18,
or 20 mm |
Large
Profile B:
Length: A-P: 31 mm ± 2 mm
Width: M-L: 31 mm ± 2 mm
Height S-I: 12, 14, 16, 18, or 20 mm |
Description: Solid Cortical Ring sourced from the human Femur
or Tibia with a minimum sidewall thickness of 4 mm. Medulary
canal is natural with cancellous matrix removed. Graft design
is offered lordosed 7º (3.5º on both superior and
inferior end) and textured or non-textured on graft/host interface.
|
|
SteriGraft™
PLIF Spinal Fusion Graft
Length: 21 mm ± .3 mm
Width: 9 mm ± .3 mm
Height: S-I: 7, 9, 11, or 13 mm ± .3 mm
Description: Solid Cortical implant 21 mm long. This allograft
is sourced from side wall of human Femur and Tibia with a
minimum allograft wall thickness of 4 mm. Medulary canal is
natural with cancellous matrix removed. Graft design is offered
lordosed 7º (3.5º on both superior and inferior
end). |
|
SteriGraft™
Dense Cancellous Block
|
Small
Profile: A
Length:
A-P: 10 mm ± .3 mm
Width:
M-L: 12 mm ± .3 mm
Height
S-I: 5,6,7,8,9, or 10 mm
|
Large
Profile: B
Length:
A-P: 12 mm ± .3 mm
Width:
14 mm ± .3 mm
Height
S-I: 5,6,7,8,9, or 10 mm
|
Description:
A solid cancellous bone construct exclusively processed
from load-bearing human bone including Femur Head, Patella,
Talus, Calcaneus and Distal Tibia. Each bone utilized to
make this specially designed allograft is load cell tested
to ensure the cancellous matrix is capable of withstanding
mechanical loads associated with cervical inter-vetebral
spaces (250 pounds of load) Graft design is offered parallel
or lordosed 5º (2.5º on both superior and inferior
end).
|
|
|
SteriGraft™
Cortical Cancellous Block
Small
Profile: A
Length:
A-P: 10 mm ± .3 mm
Width:
M-L: 12 mm ± .3 mm
Height
S-I: 5,6,7,8,9, or 10 mm
|
Large
Profile: B
Length:
A-P: 12 mm ± .3 mm
Width:
14 mm ± .3 mm
Height
S-I: 5,6,7,8,9, or 10 mm
|
Description:
A solid cancellous bone construct with an anterior cortical
wall. This allograft is exclusively processed from load-bearing
human bone including Femur Head, Patella, Talus, Calcaneus
and Distal Tibia. Each bone utilized to make this specially
designed allograft is load cell tested to ensure the cancellous
matrix is capable of withstanding mechanical loads associated
with cervical inter-vetebral spaces (250 pounds of load)
Graft design is offered parallel or lordosed 5º (2.5º
on both superior and inferior end)
|
|
To
download the SteriGraft™
Precision Spinal Fusion Allografts brochure, click
here.
Our
Allografts - Allograft Safety - Download
Files - Contact Us
|
|
